HOT WATER SAFETY CHECK
IS YOUR HOT WATER SYSTEM A TICKING TIME BOMB?
Hot Water Tanks can… and do… regularly rupture and even explode in homes throughout Australia. And The Main Culprit Is An Old and Jammed “Safety Valve”.
Major Hot Water Manufactures recommend you activate your hot water tanks Safety Valve every six months… and replace it at intervals not exceeding 5 Years (Every hot water tank has a warning above the Safety Valve stating exactly the above).
Activating The Safety Valve Is As Easy As 1,2,3!
1) Grasp the Lever Between Your Thumb and Forefinger.
2) Lift the Lever for 3 Seconds, Releasing water & Flushing the Valve.
3) Slowly Release The Valve back to close.
Don’t let your tank be one of the 20,000 that rupture every month in old alone!
Activate the Safety Valve every six months and have the valve checked for adequate performance every 5 years, or every 3 years in areas of high water particles.
Do You Want Your Hot Water Tank To Virtually Last Forever?
Well you can, and it’s as easy as just replacing your hot water tanks Rust Prevention Device.
It’s called a Sacrificial Anode
and is simply a rod made of magnesium that hangs inside your tank to attract the highly corrosive action of “Electrolysis” caused by the heating and flow of your hot water.
Hot Water tank manufacturers install a “Sacrificial Anode” in your new tank to prevent corrosion during the 5 Year warranty period.
After 5 years the anode is usually eaten away to a point where it cannot protect your tank from corrosion.
The good news is that if you inspect and replace your tanks old anode you can double to triple the life of your hot water tank.
Don’t Risk It, Your Hot Water System Could Be Starting to Develop Rust Right Now…But A Replacement Anode Will Stop The Rust Immediately…Helping to Double to Triple The Life Of Your Hot Water Tank
Call Mr Water Heater now on 0449 658 387
and we will arrange a Free Hot Water Safety Check of your tanks Sacrificial Anode.